Summary for Test 2022-10-04-35-1

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 212775
DEA: 024F2204
EFIS: 0212000073
DIST-CO-RTE-PM02-TRI-3-58.7/61.9
Award Date02/25/2021
Closeout Date05/06/2024
Work DescriptionREPLACE STRUCTURAL CONCRETE BRIDGE AND CULVERTS AND PLACE HMA.
Location DescriptionTRINITY COUNTY NEAR TRINITY CENTER FROM 58.7 MILES NORTH OF PREACHER MEADOWS ROAD TO 60.7 MILES SOUTH OF EL DORADO WAY
QA Service Level1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date10/04/2022 Sample Unique Key35
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/05/2022
Sample typeDepartment Acceptance A brief description of the sample1 bag of Shoulder Backing
The quantity of what the sample constitutesUp to 3000 tons From where was the sample collectedJob Site
First name of sampler or witnessed byBrian Last name of sampler or witnessed byAlvarez
Title of samplerAssistant Resident Engineer Telephone number of sampler
Laboratory sample identificationD79170 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTrinity Center – Moore's Pit Transportation Laboratory (TL) Number891137
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Undefined
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedStockpile at Contractors Yard
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2022-10-04-35
DIME Test ID: 2022-10-04-35-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-10-07

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Ward Jenkins
Date of test: 10/05/2022
Cumulative Mass RetainedCumulative Percent Passing
grams
0 grams100 %
0 grams100 %
0 grams100 %
0 grams100 %
0 grams100 %
936 grams94 %
4279 grams72 %
5510 grams64 %
7791 grams49 %
112.8 grams38 %
211.7 grams28 %
286.4 grams21 %
340.7 grams15 %
378.1 grams11 %
402 grams9 %
492.9 grams
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/7/2022