Summary for Test 2022-09-07-67-6
Test performed: AASHTO T30-19
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
Project Identifiers | Project ID: 993299 DEA: 022J3904 EFIS: 0221000073 |
---|---|
DIST-CO-RTE-PM | 02-SHA-44-45.5/51.6 |
Award Date | 11/16/2021 |
Closeout Date | 11/23/2022 |
Work Description | HMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING. |
Location Description | SHASTA COUNTY NEAR VIOLA FROM 3.0 MILES EAST OF DEER FLAT ROAD TO 0.5 MILE EAST OF BRIDGE CREEK ROAD |
QA Service Level | 1 (Verified on 10/18/2021) |
Sample Information
Sample Taken Date | 09/07/2022 | Sample Unique Key | 67 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/07/2022 |
Sample type | Acceptance | A brief description of the sample | 16 boxes of Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and virgin PG 58-34 M from Valero – Benicia |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | JD | Last name of sampler or witnessed by | Atkinson |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D79152 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | J.F. Shea Construction – Fawndale Rock and Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 857908 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/8 inch | Lot number | |
Sublot number | HMA Mix Number | Not set |
Test Details
DIME Sample ID: 2022-09-07-67
DIME Test ID: 2022-09-07-67-6
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2022-09-23
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Calculated
Tester's full name: Karen Rios Dorado
Date of test: 09/23/2022
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 100 %
Cumulative percent passing the 3/8 in. sieve: 99 %
Cumulative percent passing the #4 sieve: 59 %
Cumulative percent passing the #8 sieve: 37 %
Cumulative percent passing the #16 sieve: 26 %
Cumulative percent passing the #30 sieve: 19 %
Cumulative percent passing the #50 sieve: 13 %
Cumulative percent passing the #100 sieve: 10 %
Cumulative percent passing the #200 sieve: 7.8 %
General comments (publicly viewable) (Max 1000 characters): Coarse on the № 4 sieve.
Test was verified on 9/23/2022 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.