Summary for Test 2022-09-07-67-3
Test performed: AASHTO T275-07r12Project Information
Project Identifiers | Project ID: 993299 DEA: 022J3904 EFIS: 0221000073 |
---|---|
DIST-CO-RTE-PM | 02-SHA-44-45.5/51.6 |
Award Date | 11/16/2021 |
Closeout Date | 11/23/2022 |
Work Description | HMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING. |
Location Description | SHASTA COUNTY NEAR VIOLA FROM 3.0 MILES EAST OF DEER FLAT ROAD TO 0.5 MILE EAST OF BRIDGE CREEK ROAD |
QA Service Level | 1 (Verified on 10/18/2021) |
Sample Information
Sample Taken Date | 09/07/2022 | Sample Unique Key | 67 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/07/2022 |
Sample type | Acceptance | A brief description of the sample | 16 boxes of Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and virgin PG 58-34 M from Valero – Benicia |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | JD | Last name of sampler or witnessed by | Atkinson |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D79152 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | J.F. Shea Construction – Fawndale Rock and Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 857908 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/8 inch | Lot number | |
Sublot number | HMA Mix Number | Not set |
Test Details
DIME Sample ID: 2022-09-07-67
DIME Test ID: 2022-09-07-67-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2022-09-23
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Colt Sweeny and Darrell Valasek
Date of test: 09/08/2022
Mass of the dry specimen in air: 4647.0 g
Mass of the dry specimen plus paraffin coating in air: 4706.6 g
Mass of the dry specimen plus paraffin coating in water: 2670.6 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4647.8 g
Mass 2 of the dry specimen plus paraffin coating in air: 4700.2 g
Mass 2 of the dry specimen plus paraffin coating in water: 2671.8 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4647.7 g
Mass 3 of the dry specimen plus paraffin coating in air: 4703.0 g
Mass 3 of the dry specimen plus paraffin coating in water: 2672.2 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.359
Bulk Specific Gravity 2: 2.359
Bulk Specific Gravity 3: 2.360
Average Bulk Specific Gravity: 2.359
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/23/2022 ✔