Summary for Test 2022-08-19-52-1
Test performed: AASHTO T27-14
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
Project Identifiers | Project ID: 993535 DEA: 081M1104 EFIS: 0821000078 |
---|---|
DIST-CO-RTE-PM | 08-SBD-215-10.0/17.2 |
Award Date | 03/14/2022 |
Closeout Date | 12/05/2022 |
Work Description | HMA, COLD PLANE AC PAVEMENT, AND TRAFFIC STRIPE TAPE. |
Location Description | SAN BERNARDINO COUNTY?FROM 0.1 MILE NORTH OF 27TH STREET TO 0.1 MILE SOUTH OF DEVORE ROAD |
QA Service Level | 1 (Verified on 02/21/2022) |
Sample Information
Sample Taken Date | 08/19/2022 | Sample Unique Key | 52 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/20/2022 |
Sample type | Acceptance | A brief description of the sample | JMF 3/4" HMA-A-SP-R23 0.5% LAS |
The quantity of what the sample constitutes | 1 Bag of Combined Aggregate | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Vulcan | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0339A-22 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan-San Bernardino Portable | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0137, 91-19-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | 223506 | |
The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan AC Drum Plant San Bernardino | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-08-19-52
DIME Test ID: 2022-08-19-52-1
Testing Lab: CT D08 - Fontana Field Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-09-15
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Chizitere Ozuruigbo
Date of test: 08/20/2022
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 81 %
Cumulative percent passing the 3/8 in. sieve: 67 %
Cumulative percent passing the #4 sieve: 44 %
Cumulative percent passing the #8 sieve: 29 %
Cumulative percent passing the #16 sieve: 21 %
Cumulative percent passing the #30 sieve: 15 %
Cumulative percent passing the #50 sieve: 10 %
Cumulative percent passing the #100 sieve: 7 %
Cumulative percent passing the #200 sieve: 5 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/15/2022 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.