Summary for Test 2022-08-31-38-1

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 212498
DEA: 021H5204
EFIS: 0217000009
DIST-CO-RTE-PM02-SIS-3,263-48.5/49.7 - 49.41
Award Date06/09/2023
Closeout DateNot set
Work DescriptionRoadway Rehabilitation
Location Description02-Sis-3, 263-R46.8/R48.0, 49.07/49.41
QA Service Level1 (Verified on 06/06/2017)

Sample Information

Sample Taken Date08/31/2022 Sample Unique Key38
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/01/2022
Sample typeAcceptance A brief description of the sample3 bags of 3/4-inch Class 2 Aggregate Base
The quantity of what the sample constitutes3000 tons From where was the sample collectedManufacturer
First name of sampler or witnessed byDanny Last name of sampler or witnessed byHansen
Title of samplerConsultant Telephone number of sampler
Laboratory sample identificationD79147 Linked DIME Sample ID
The fabricator/manufacturer/facility nameCustom Crushing Transportation Laboratory (TL) Number891187
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Custom Crushing
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedWindrow
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2022-08-31-38
DIME Test ID: 2022-08-31-38-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-09-12

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Karen Dorado
Date of test: 09/02/2022
Individual Mass RetainedCumulative Percent Passing
grams
0 grams100 %
0 grams100 %
0 grams100 %
0 grams100 %
0 grams100 %
570 grams97 %
3893 grams79.1 %
2248 grams69 %
4338 grams48 %
151.7 grams34 %
90.9 grams26 %
62.6 grams20 %
57 grams15 %
52 grams10 %
34.9 grams6.6 %
71.9 grams
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/12/2022