Summary for Test 2022-08-10-40-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214451 DEA: 07303704 EFIS: 0714000035 |
---|---|
DIST-CO-RTE-PM | 07-LA-101-8.0/27.3 |
Award Date | 12/19/2019 |
Closeout Date | 05/07/2024 |
Work Description | REPLACE CONCRETE BARRIERS. |
Location Description | THE CITY AND COUNTY OF LOS ANGELES FROM PILGRIMAGE OVERCROSSING TO VALLEY CIRCLE BOULEVARD OVERCROSSING |
QA Service Level | 1 (Verified on 08/12/2020) |
Sample Information
Sample Taken Date | 08/10/2022 | Sample Unique Key | 40 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 08/12/2022 |
Sample type | Department Acceptance | A brief description of the sample | 3/4 HMA-A |
The quantity of what the sample constitutes | 90 tons | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Victor | Last name of sampler or witnessed by | Pham |
Title of sampler | Telephone number of sampler | 2137924794 | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | AAA Irwindale | Transportation Laboratory (TL) Number | C-0810B1 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 105793 SJR | The fabricator/manufacturer designation for the sample | |
The plant number | Irwindale | A detailed description of where the material sample was collected | Belt Discharge |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-08-10-40
DIME Test ID: 2022-08-10-40-1
Testing Lab: CT D07 - Plant Services
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-09-02
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: A.Toledo
Date of test: 08/19/2022
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
6210 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
194.0 grams | 96.9 % | |||||
1160.0 grams | 81.3 % | |||||
2060.0 grams | 66.8 % | |||||
3530.0 grams | 43.2 % | |||||
156.0 grams | 30.2 % | |||||
277.0 grams | 20.1 % | |||||
357.0 grams | 13.4 % | |||||
412.0 grams | 8.8 % | |||||
449.0 grams | 5.7 % | |||||
468.0 grams | 4.09 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/2/2022 ✔