DIME - Test Summary

Summary for Test 2022-07-11-81-6

Test performed: AASHTO T304-11

Project Identifiers	Project ID: 993345 DEA: 022J4004 EFIS: 0221000074
DIST-CO-RTE-PM	02-LAS-395-56.5/R61.1
Award Date	02/02/2022
Closeout Date	11/23/2022
Work Description	COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HMA.
Location Description	LASSEN COUNTY NEAR JANESVILLE FROM 0.1 MILE NORTH OF SUNNYSIDE ROAD TO 0.1 MILE NORTH OF ROUTE 36
QA Service Level	1 (Verified on 11/01/2021)

Sample Taken Date	07/11/2022	Sample Unique Key	81
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/14/2022
Sample type	Acceptance	A brief description of the sample	Combined Untreated 1/2-inch Virgin Aggregate
The quantity of what the sample constitutes	Production Start-Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	CGI	Last name of sampler or witnessed by	.
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification	D79090F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Hat Creek Construction and Materials – Ward Lake Plant (Litchfield, CA)	Transportation Laboratory (TL) Number	894728
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-18-0008::Ward Lake Pit
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Laboratory Batched from Untreated Sized Virgin Aggregate Stockpile Samples
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-07-11-81

DIME Test ID: 2022-07-11-81-6

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)

Test Release Date: 2022-08-15

What test method is performed?: Method A

Input Type: Measured

Tester's full name: Dennis Hickey

Date of test: 08/09/2022

Mass of measure: 190.2 grams

Bulk dry specific gravity: 2.544

Mass of sample and measure #1: 327 grams

Mass of sample and measure #2: 326.8 grams

Volume of cylinder: 100.2 mL

Mass of sample #1: 136.8 grams

Mass of sample #2: 136.6 grams

Uncompacted voids #1: 46.3 %

Uncompacted voids #2: 46.4 %

Average uncompacted voids: 46.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/15/2022 ✔