Summary for Test 2022-07-11-74-3
Test performed: AASHTO T275-07r12Project Information
Project Identifiers | Project ID: 993345 DEA: 022J4004 EFIS: 0221000074 |
---|---|
DIST-CO-RTE-PM | 02-LAS-395-56.5/R61.1 |
Award Date | 02/02/2022 |
Closeout Date | 11/23/2022 |
Work Description | COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HMA. |
Location Description | LASSEN COUNTY NEAR JANESVILLE FROM 0.1 MILE NORTH OF SUNNYSIDE ROAD TO 0.1 MILE NORTH OF ROUTE 36 |
QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
Sample Taken Date | 07/11/2022 | Sample Unique Key | 74 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/14/2022 |
Sample type | Acceptance | A brief description of the sample | Lime Treated 1/2-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and virgin PG 58-34 M from Albina Klamath Falls |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | CGI | Last name of sampler or witnessed by | . |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | D79088 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction and Materials – Ward Lake Plant (Litchfield, CA) | Transportation Laboratory (TL) Number | 896423 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number | Not set |
Test Details
DIME Sample ID: 2022-07-11-74
DIME Test ID: 2022-07-11-74-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2022-08-16
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 07/18/2022
Mass of the dry specimen in air: 4464.8 g
Mass of the dry specimen plus paraffin coating in air: 4548.4 g
Mass of the dry specimen plus paraffin coating in water: 2482.0 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4468.9 g
Mass 2 of the dry specimen plus paraffin coating in air: 4541.4 g
Mass 2 of the dry specimen plus paraffin coating in water: 2516.1 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4463.9 g
Mass 3 of the dry specimen plus paraffin coating in air: 4535.0 g
Mass 3 of the dry specimen plus paraffin coating in water: 2492.0 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.262
Bulk Specific Gravity 2: 2.298
Bulk Specific Gravity 3: 2.273
Average Bulk Specific Gravity: 2.278
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/16/2022 ✔