Summary for Test 2022-07-19-70-7
Test performed: CTM 212-May 2010Project Information
| Project Identifiers | Project ID: 993344 DEA: 022J3804 EFIS: 0221000072 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-3-R48.0/51.0 |
| Award Date | 12/20/2021 |
| Closeout Date | 07/27/2023 |
| Work Description | HMA OVERLAY AND REPLACE AC SURFACING. |
| Location Description | SISKIYOU COUNTY IN AND NEAR YREKA FROM 0.1 MILE SOUTH OF JUNIPER DRIVE TO 0.3 MILE NORTH OF CALAMITY LANE |
| QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
| Sample Taken Date | 07/19/2022 | Sample Unique Key | 70 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/20/2022 |
| Sample type | Acceptance | A brief description of the sample | 2 bags of Shoulder Backing |
| The quantity of what the sample constitutes | Shoulder Backing (approx. 940 tons) | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | M. | Last name of sampler or witnessed by | Birkland |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | D79102 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Custom Crushing | Transportation Laboratory (TL) Number | 853093 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Custom Crushing |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-07-19-70
DIME Test ID: 2022-07-19-70-7
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2022-08-02
Test Results
Input Type: Measured
Tester's full name: Khue Yang
Date of test: 07/26/2022
Weight of water in the measure: 21.075 lbm
Water temperature: 70 deg F
Tare weight of empty measure: 13 lbm
Weight of measure filled with aggregate (test 1): 50.65 lbm
Weight of measure filled with aggregate (test 2): 50.5 lbm
Weight of measure filled with aggregate (test 3): 50.6 lbm
Water density: 62.3 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 37.65 lbm
Net weight of aggregate in measure (test 2): 37.5 lbm
Net weight of aggregate in measure (test 3): 37.6 lbm
Average net weight of aggregate required to fill the measure: 37.58 lbm
Aggregate unit weight: 111.1 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/2/2022 ✔