Summary for Test 2022-07-19-70-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 993344 DEA: 022J3804 EFIS: 0221000072 |
---|---|
DIST-CO-RTE-PM | 02-SIS-3-R48.0/51.0 |
Award Date | 12/20/2021 |
Closeout Date | 07/27/2023 |
Work Description | HMA OVERLAY AND REPLACE AC SURFACING. |
Location Description | SISKIYOU COUNTY IN AND NEAR YREKA FROM 0.1 MILE SOUTH OF JUNIPER DRIVE TO 0.3 MILE NORTH OF CALAMITY LANE |
QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
Sample Taken Date | 07/19/2022 | Sample Unique Key | 70 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/20/2022 |
Sample type | Acceptance | A brief description of the sample | 2 bags of Shoulder Backing |
The quantity of what the sample constitutes | Shoulder Backing (approx. 940 tons) | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | M. | Last name of sampler or witnessed by | Birkland |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | D79102 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Custom Crushing | Transportation Laboratory (TL) Number | 853093 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Custom Crushing |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Stockpile | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-07-19-70
DIME Test ID: 2022-07-19-70-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-08-02
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Arthur Mills, Karen Dorado
Date of test: 07/21/2022
Individual Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
1765 grams | 88 % | |||||
1122 grams | 80 % | |||||
1557 grams | 69.4 % | |||||
837 grams | 64 % | |||||
1610 grams | 53 % | |||||
84.1 grams | 44 % | |||||
66.2 grams | 37 % | |||||
52.4 grams | 31 % | |||||
51.1 grams | 26 % | |||||
46.6 grams | 21 % | |||||
34.3 grams | 16.8 % | |||||
156.1 grams |
General comments (publicly viewable) (Max 1000 characters): Fine on the № 30 and 200 sieves.
Test was verified on 8/2/2022 ✔