Summary for Test 2022-07-11-64-3
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 993623 DEA: 022J3704 EFIS: 0221000071 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-299-50.5/56.5,93.5/99.3 |
| Award Date | 04/29/2022 |
| Closeout Date | 10/06/2022 |
| Work Description | ASPHALT RUBBER BINDER SEAL COAT, COLD PLANE AC PAVEMENT AND HMA. |
| Location Description | SHASTA COUNTY NEAR MONTGOMERY CREEK FROM 0.2 MILE WEST OF OAK POINT DRIVE TO OLD BERTAGNA PLACE AND FROM 0.1 MILE EAST OF SIERRA CENTER DRIVE TO LASSEN COUNTY LINE |
| QA Service Level | 1 (Verified on 03/18/2022) |
Sample Information
| Sample Taken Date | 07/11/2022 | Sample Unique Key | 64 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/11/2022 |
| Sample type | Department Acceptance | A brief description of the sample | Combined RAP |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | D79086B | Linked DIME Sample ID | 2022-07-11-62, 2022-07-11-63 |
| The fabricator/manufacturer/facility name | J.F. Shea Construction - Fawndale Rock and Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 867311 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Fawndale Rock and Asphalt, Redding, CA |
|---|---|---|---|
| Aggregate Size | 3/8 inch | Aggregate Source | |
| RAP Stockpile | Stockpile Size (tons) | ||
| Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-07-11-64
DIME Test ID: 2022-07-11-64-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2022-07-28
Test Results
Does this test use 1/4 sieve?: Yes
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Khue Yang
Date of test: 07/15/2022
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1507.9 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 27.0 grams | 98.2 % | |||||
| 329.3 grams | 78.2 % | |||||
| 528.9 grams | 64.9 % | |||||
| 851.0 grams | 43.6 % | |||||
| 1044.1 grams | 30.8 % | |||||
| 1170.5 grams | 22.4 % | |||||
| 1263.7 grams | 16.2 % | |||||
| 1327.8 grams | 11.9 % | |||||
| 1367.5 grams | 9.3 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/28/2022 ✔