Summary for Test 2022-07-15-49-3
Test performed: AASHTO T275-07r12Project Information
Project Identifiers | Project ID: 993344 DEA: 022J3804 EFIS: 0221000072 |
---|---|
DIST-CO-RTE-PM | 02-SIS-3-R48.0/51.0 |
Award Date | 12/20/2021 |
Closeout Date | 07/27/2023 |
Work Description | HMA OVERLAY AND REPLACE AC SURFACING. |
Location Description | SISKIYOU COUNTY IN AND NEAR YREKA FROM 0.1 MILE SOUTH OF JUNIPER DRIVE TO 0.3 MILE NORTH OF CALAMITY LANE |
QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
Sample Taken Date | 07/15/2022 | Sample Unique Key | 49 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/15/2022 |
Sample type | Acceptance | A brief description of the sample | Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and Virgin PG 58-34 M from Valero – Benicia |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Clint | Last name of sampler or witnessed by | Rogers |
Title of sampler | PEI Tech | Telephone number of sampler | |
Laboratory sample identification | D79092 | Linked DIME Sample ID | 2022-07-15-50, 2022-07-15-51 |
The fabricator/manufacturer/facility name | Tullis – Northstate Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 891184 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/8 inch | Lot number | |
Sublot number | HMA Mix Number | Not set |
Test Details
DIME Sample ID: 2022-07-15-49
DIME Test ID: 2022-07-15-49-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2022-07-29
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 07/15/2022
Mass of the dry specimen in air: 4689.0 g
Mass of the dry specimen plus paraffin coating in air: 4733.0 g
Mass of the dry specimen plus paraffin coating in water: 2714.6 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4689.6 g
Mass 2 of the dry specimen plus paraffin coating in air: 4735.9 g
Mass 2 of the dry specimen plus paraffin coating in water: 2710.0 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4691.5 g
Mass 3 of the dry specimen plus paraffin coating in air: 4743.1 g
Mass 3 of the dry specimen plus paraffin coating in water: 2710.7 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.381
Bulk Specific Gravity 2: 2.375
Bulk Specific Gravity 3: 2.375
Average Bulk Specific Gravity: 2.377
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/29/2022 ✔