Summary for Test 2022-06-17-47-5
Test performed: AASHTO T315-20Project Information
Project Identifiers | Project ID: 993590 DEA: 101J2004 EFIS: 1018000147 |
---|---|
DIST-CO-RTE-PM | 10-SJ-26-8.0/17.8 |
Award Date | 04/12/2022 |
Closeout Date | 05/10/2023 |
Work Description | COLD PLANE AND HMA OVERLAY. |
Location Description | SAN JOAQUIN COUNTY AT AND NEAR LINDEN AT VARIOUS LOCATIONS FROM 0.7 MILE EAST OF GOGNA ROAD TO 1.3 MILES WEST OF SHELLEY ROAD |
QA Service Level | 1 (Verified on 03/01/2022) |
Sample Information
Sample Taken Date | 06/17/2022 | Sample Unique Key | 47 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/08/2022 |
Sample type | Department Acceptance | A brief description of the sample | PG 64-28M |
The quantity of what the sample constitutes | 2 Cans | From where was the sample collected | Source |
First name of sampler or witnessed by | T | Last name of sampler or witnessed by | Trefz |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Valero Benicia | Transportation Laboratory (TL) Number | 994771 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-28 M |
---|---|---|---|
Modified | Yes | Lot number | |
Sublot number | Tank number | ||
Time of sample | HMA Supplier | ||
Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
DIME Sample ID: 2022-06-17-47
DIME Test ID: 2022-06-17-47-5
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-07-26
Test Results
Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 07/14/2022
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.410 kPa
Phase Angle (δ) (for the 10 cycles): 62.8 degree
Complex Modulus (G*) (for the 10 measurements): 4.098 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 4.61 kPa
Stress Amplitude 2: 0.234 kPa
Phase Angle 2 (δ) (for the 10 cycles): 65.8 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 2.343 kPa
Test Temperature (Specimen 2): 70.0 C
Dynamic Shear 2, G*/sin(δ): 2.57 kPa
Delta at 2.2 kpa: 66.3 degree
General comments (publicly viewable) (Max 1000 characters): RTFO
Test was verified on 7/26/2022 ✔