Summary for Test 2022-04-13-88-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 993345 DEA: 022J4004 EFIS: 0221000074 |
---|---|
DIST-CO-RTE-PM | 02-LAS-395-56.5/R61.1 |
Award Date | 02/02/2022 |
Closeout Date | 11/23/2022 |
Work Description | COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HMA. |
Location Description | LASSEN COUNTY NEAR JANESVILLE FROM 0.1 MILE NORTH OF SUNNYSIDE ROAD TO 0.1 MILE NORTH OF ROUTE 36 |
QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
Sample Taken Date | 04/13/2022 | Sample Unique Key | 88 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/13/2022 |
Sample type | Verification | A brief description of the sample | Washed Dust Untreated Sized Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Terry | Last name of sampler or witnessed by | Schmitt |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D79020D | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Ward Lake Plant (Litchfield, CA) | Transportation Laboratory (TL) Number | 896946 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008::Ward Lake Pit |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Sized Untreated Virgin Stockpile | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | fine | |
The concrete mix design number | JMF 22-04-S01 | Lot number | |
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-04-13-88
DIME Test ID: 2022-04-13-88-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-07-12
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Karen Rios Dorado
Date of test: 04/21/2022
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
499.1 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
11.2 grams | 97.8 % | |||||
66.0 grams | 86.8 % | |||||
187.1 grams | 49.3 % | |||||
292.6 grams | 28.2 % | |||||
354.0 grams | 15.9 % | |||||
391.7 grams | 8.3 % | |||||
414.5 grams | 3.7 % | |||||
423.1 grams | 2 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters): Sample was coarse on the No. 4, 8,16, and 30 sieves.
Test was verified on 7/12/2022 ✔