Summary for Test 2022-06-15-44-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 215664 DEA: 070W0304 EFIS: 0720000257 |
---|---|
DIST-CO-RTE-PM | 07-VEN,LA-126-R13.2/R34.6,R0.0/R4.1 |
Award Date | 05/21/2021 |
Closeout Date | 10/02/2023 |
Work Description | REPLACE AC SURFACING, PLACE SLURRY SEAL AND PAVEMENT MARKING. |
Location Description | VENTURA AND LOS ANGELES COUNTIES NEAR SANTA PAULA AND SANTA CLARITA FROM HALLOCK DRIVE TO CASTAIC CREEK BRIDGE |
QA Service Level | 1 (Verified on 09/27/2021) |
Sample Information
Sample Taken Date | 06/15/2022 | Sample Unique Key | 44 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/15/2022 |
Sample type | Department Acceptance | A brief description of the sample | Type I Slurry Aggregate |
The quantity of what the sample constitutes | 150 tons | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Hopkins |
Title of sampler | Plant Inspector | Telephone number of sampler | 213-792-4793 |
Laboratory sample identification | KH202B | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Pavement Coatings Co | Transportation Laboratory (TL) Number | C061522A |
Inspector Lot Number from the Transportation Laboratory (TL) Form | KH202B | Structure unique identifier | |
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0052 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Type 1 Slurry Seal | The fabricator/manufacturer designation for the sample | Pavement Coatings Co |
The plant number | Pavement Coatings Co | A detailed description of where the material sample was collected | Stockpile @ Yard |
Where the material sample would have been placed if not sampled | Jobsite | Primary Aggregate Nominal Size | fine |
The concrete mix design number | Type 1 Slurry Seal | Lot number | |
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-06-15-44
DIME Test ID: 2022-06-15-44-1
Testing Lab: CT D07 - Plant Services
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-07-08
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Kevin Hopkins
Date of test: 06/21/2022
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
456 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
52 grams | 89 % | |||||
151 grams | 67 % | |||||
220 grams | 52 % | |||||
288 grams | 37 % | |||||
351 grams | 23 % | |||||
390 grams | 14 % | |||||
456 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/8/2022 ✔