Summary for Test 2022-06-24-25-4
Test performed: AASHTO T313-19Project Information
Project Identifiers | Project ID: 215555 DEA: 061A9804 EFIS: 0620000145 |
---|---|
DIST-CO-RTE-PM | 06-TUL-65,190,198,245-Var |
Award Date | 04/29/2021 |
Closeout Date | 08/07/2023 |
Work Description | COLD PLANE AND REPLACE WITH HMA AND RESURFACE WITH CHIP SEAL. |
Location Description | TULARE COUNTY AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 03/10/2021) |
Sample Information
Sample Taken Date | 06/24/2022 | Sample Unique Key | 25 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/28/2022 |
Sample type | Acceptance | A brief description of the sample | PG70-10 |
The quantity of what the sample constitutes | 1 Can | From where was the sample collected | Source |
First name of sampler or witnessed by | DCA | Last name of sampler or witnessed by | _ |
Title of sampler | QC | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | San Joaquin Refining Co Inc | Transportation Laboratory (TL) Number | 773879 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 70-10 |
---|---|---|---|
Modified | No | Lot number | |
Sublot number | Tank number | 1 | |
Time of sample | HMA Supplier | ||
Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
DIME Sample ID: 2022-06-24-25
DIME Test ID: 2022-06-24-25-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2022-07-06
Test Results
Input Type: Measured
Tester's full name: Erika Gonzalez
Date of test: 07/01/2022
Minimum test bath temperature at 240 s: 0.0 C
Maximum test bath temperature at 240 s: -0.1 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 994.0 mN
Beam deflection 60.0 s: 0.375 µm
Measured Stiffness Modulus 60.0 s: 213.000 mPa
Estimated Stiffness Modulus 60.0 s: 213.000 mPa
Difference between stiffness moduli 60.0 s: 0.00 %
Estimated m-value 60.0 s: 0.368
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/6/2022 ✔