Summary for Test 2022-06-13-29-2
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 215789 DEA: 10462104 EFIS: 1013000266 |
|---|---|
| DIST-CO-RTE-PM | 10-TUO-108-R18.9/38.8 |
| Award Date | 08/02/2021 |
| Closeout Date | 06/26/2023 |
| Work Description | COLD PLANE, HMA, DRAINAGE REPLACEMENT, AND MODIFY TRAFFIC STATIONS. |
| Location Description | TUOLUMNE COUNTY IN AND NEAR LONG BARN FROM 0.1 MILE WEST OF LONG BARN ROAD TO 2.3 MILES EAST OF COW CREEK ROAD |
| QA Service Level | 1 (Verified on 06/04/2021) |
Sample Information
| Sample Taken Date | 06/13/2022 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/20/2022 |
| Sample type | Acceptance | A brief description of the sample | 3/4 " HMA-A SP R22 PG 58-34M |
| The quantity of what the sample constitutes | 2 cans | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | J | Last name of sampler or witnessed by | Kori |
| Title of sampler | Inspector | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | George Reed - Table Mountain Plant | Transportation Laboratory (TL) Number | 994759 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 M |
|---|---|---|---|
| Modified | Yes | Lot number | 1 |
| Sublot number | 1 | Tank number | |
| Time of sample | 06/13/2022 | HMA Supplier | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-06-13-29
DIME Test ID: 2022-06-13-29-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-07-07
Test Results
Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 06/21/2022
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 1.049 kPa
Phase Angle (δ) (for the 10 cycles): 55.9 degree
Complex Modulus (G*) (for the 10 measurements): 10.491 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 12.67 kPa
Stress Amplitude 2: 0.604 kPa
Phase Angle 2 (δ) (for the 10 cycles): 56.9 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 6.036 kPa
Test Temperature (Specimen 2): 64.0 C
Dynamic Shear 2, G*/sin(δ): 7.21 kPa
Delta at 2.2 kpa: 57.8 degree
General comments (publicly viewable) (Max 1000 characters): RTFO
Test was verified on 7/7/2022 ✔