Summary for Test 2022-06-09-26-2

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 215801
DEA: 010F2404
EFIS: 0115000094
DIST-CO-RTE-PM01-DN-101-R5.1/R5.6
Award Date08/02/2021
Closeout Date11/21/2022
Work DescriptionHOT MIX ASPHALT (TYPE A AND LEVELING).
Location DescriptionDEL NORTE COUNTY NEAR KLAMATH FROM 0.2 MILE SOUTH TO 0.2 MILE NORTH OF ROUTE 101 AND EHLERS WAY INTERSECTION
QA Service Level1 (Verified on 07/06/2021)

Sample Information

Sample Taken Date06/09/2022 Sample Unique Key26
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/13/2022
Sample typeDepartment Acceptance A brief description of the sample1/2" HMA, PG 64-16
The quantity of what the sample constitutes1 Can From where was the sample collectedManufacturer
First name of sampler or witnessed byJ Last name of sampler or witnessed byAtturio
Title of samplerSamples Tester Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameMercer Fraser - Fortuna Plant A Transportation Laboratory (TL) Number930517
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2022-06-09-26
DIME Test ID: 2022-06-09-26-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-06-22

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 06/14/2022
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.454 kPa
Phase Angle (δ) (for the 10 cycles): 78.9 degree
Complex Modulus (G*) (for the 10 measurements): 4.540 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 4.63 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO

Test was verified on 6/22/2022