Summary for Test 2022-06-08-21-2

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 993583
DEA: 032G4004
EFIS: 0321000121
DIST-CO-RTE-PM03-SAC-220-0.0/3.0
Award Date04/15/2022
Closeout Date05/15/2023
Work DescriptionREPLACE AC SURFACING, PLACE HMA (TYPE A), & COLD PLANE AC PVMT.
Location DescriptionSACRAMENTO COUNTY NEAR WALNUT GROVE FROM THE SOLANO COUNTY LINE TO 0.1 MILE WEST OF ROUTE 160
QA Service Level1 (Verified on 02/28/2022)

Sample Information

Sample Taken Date06/08/2022 Sample Unique Key21
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/13/2022
Sample typeDepartment Acceptance A brief description of the sampleBinder, 3/4" HMA-SP-R15
The quantity of what the sample constitutes1 Can From where was the sample collectedFabricator
First name of sampler or witnessed byArthur Last name of sampler or witnessed byTrillo
Title of samplerQA Super Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGeorge Reed - Clements Plant Transportation Laboratory (TL) Number849795
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-10
ModifiedNo Lot number1
Sublot number3 Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierVSS Emultech - West Sacramento CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2022-06-08-21
DIME Test ID: 2022-06-08-21-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-06-21

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 06/14/2022
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.361 kPa
Phase Angle (δ) (for the 10 cycles): 83.5 degree
Complex Modulus (G*) (for the 10 measurements): 3.611 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 3.63 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO

Test was verified on 6/21/2022