Summary for Test 2022-05-04-35-2
Test performed: AASHTO T104-99r16Project Information
Project Identifiers | Project ID: 993310 DEA: 020J3804 EFIS: 0219000111 |
---|---|
DIST-CO-RTE-PM | 02-LAS-36-R20.5/22.8 |
Award Date | 02/04/2022 |
Closeout Date | 08/11/2023 |
Work Description | EXPAND EXISTING BRAKE CHECK AREA AND HMA PAVING. |
Location Description | LASSEN COUNTY NEAR SUSANVILLE AT 1.3 MILES EAST OF ROUTE 44 AND FROM 0.1 MILE EAST OF EAGLE LAKE ROAD TO 1.3 MILES WEST OF HARRIS DRIVE |
QA Service Level | 1 (Verified on 10/18/2021) |
Sample Information
Sample Taken Date | 05/04/2022 | Sample Unique Key | 35 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/05/2022 |
Sample type | Acceptance | A brief description of the sample | Crusher Dust Sized Untreated Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | CGI | Last name of sampler or witnessed by | . |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | D79025 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction, Ward Lake Plant, Litchfield, CA | Transportation Laboratory (TL) Number | 898178 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-05-04-35
DIME Test ID: 2022-05-04-35-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2022-06-17
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Bang Nguyen
Date of test: 06/17/2022
Percentage of ⅜ inch x No. 4 material loss: 4.6 %
Percentage of No. 4 x 8 material loss: 2.6 %
Percentage of No. 8 x 16 material loss: 0.7 %
Percentage of No. 16 x 30 material loss: 1.2 %
Percentage of No. 30 x 50 material loss: 1.8 %
Fine weighted average loss: 2.6 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/17/2022 ✔