Summary for Test 2022-02-16-34-3
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 993252 DEA: 030H6504 EFIS: 0316000003 |
|---|---|
| DIST-CO-RTE-PM | 03-COL-20-34.8/36.5 |
| Award Date | 11/17/2021 |
| Closeout Date | 07/21/2023 |
| Work Description | RDWY EXCAVATION, COLD PLANE AC PVMT, & OVERLAY. |
| Location Description | COLUSA COUNTY 1.7 MILES EAST OF COLUSA FROM NIAGARA AVENUE TO 0.3 MILE WEST OF STEIDLMAYER ROAD |
| QA Service Level | 1 (Verified on 09/27/2021) |
Sample Information
| Sample Taken Date | 02/16/2022 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/22/2022 |
| Sample type | Verification | A brief description of the sample | 3/8" RAP |
| The quantity of what the sample constitutes | bags of Rap | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | M | Last name of sampler or witnessed by | Atterberry |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Teichert Hallwood | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Teichert Hallwood |
|---|---|---|---|
| Aggregate Size | Aggregate Source | ||
| RAP Stockpile | Stockpile Size (tons) | ||
| Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-02-16-34
DIME Test ID: 2022-02-16-34-3
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2022-06-14
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Julian Gonzales
Date of test: 02/22/2022
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1551.2 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 74.0 grams | 95.2 % | |||||
| 315.6 grams | 79.7 % | |||||
| 784.9 grams | 49.4 % | |||||
| 1066.5 grams | 31.2 % | |||||
| 1197.3 grams | 22.8 % | |||||
| 1272.8 grams | 17.9 % | |||||
| 1334.7 grams | 14 % | |||||
| 1390.9 grams | 10.3 % | |||||
| 1434.8 grams | 7.5 % | |||||
General comments (publicly viewable) (Max 1000 characters): JMF22-008
Test was verified on 6/14/2022 ✔