Summary for Test 2022-04-25-15-7
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 04/25/2022 | Sample Unique Key | 15 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/25/2022 |
Sample type | Verification | A brief description of the sample | 1/2" RHMA-G PG 64-16 with 0.25% LAS15% RAP |
The quantity of what the sample constitutes | 24 Boxes, 4 Qt cans of binder | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Akira | Last name of sampler or witnessed by | Hasegawa |
Title of sampler | MREA | Telephone number of sampler | |
Laboratory sample identification | 022-012 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Deer Creek Porterville | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number | Not set |
Test Details
DIME Sample ID: 2022-04-25-15
DIME Test ID: 2022-04-25-15-7
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2022-05-13
Test Results
Specified number of passes at 12.7 mm: 15000
Input Type: Measured
Tester's full name: Glenn Bradley
Date of test: 05/13/2022
Test Temperature: 122 F
HMA Production: Field Plant Produced
Compaction Method: SGC Cylindrical Specimen
Binder High PG Grade: no data
Binder Content TWM: 0.0 %
Air Void Content: 0.0 %
Aggregate Gradation: 0.0 mm
Type and Amount of Anti-Stripping Additive: 0.25%
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 3.87 mm
Maximum impression at 5000 passes (right wheel): 3.02 mm
Average impression at 5000 passes (left/right avg): 3.45 mm
Maximum impression at 10000 passes (left wheel): 4.5 mm
Maximum impression at 10000 passes (right wheel): 3.85 mm
Average impression at 10000 passes (left/right avg): 4.18 mm
Maximum impression at 15000 passes (left wheel): 5.22 mm
Maximum impression at 15000 passes (right wheel): 4.31 mm
Average impression at 15000 passes (left/right avg): 4.76 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/13/2022 ✔