Summary for Test 2016-05-31-12-3
Test performed: ASTM A370-15Project Information
| Project Identifiers | Project ID: 208682 DEA: 083401U4 EFIS: 0800000609 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-138,138-6.2/6.4,2.3/R15.2 |
| Award Date | 09/10/2014 |
| Closeout Date | 06/23/2021 |
| Work Description | WIDEN TO 4 LNS FR BEEKLEY RD TO JCT 15, ADD 1 LN EB FR PHELAN RD TO |
| Location Description | SAN BERNARDINO COUNTY ON ROUTE 138 NEAR PHELAN FROM 0.6 MILE WEST OF PHELAN ROAD TO THE JUNCTION OF ROUTE 15 AND ON ROUTE 2 FROM 0.1 MILE NORTH OF WILD HORSE CANYON ROAD TO ROUTE 138 |
| QA Service Level | 1 (Verified on 03/11/2013) |
Sample Information
| Sample Taken Date | 05/31/2016 | Sample Unique Key | 12 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/03/2016 |
| Sample type | Quality Assurance | A brief description of the sample | Ductile Iron Casting |
| The quantity of what the sample constitutes | 128 | From where was the sample collected | Source |
| First name of sampler or witnessed by | Debbie | Last name of sampler or witnessed by | Ozuna |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Dotson iron casting | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM6 - Ductile Iron Cast Samples | Heat Number (s) | 1466, 1476 |
|---|---|---|---|
| Part Number (s) | 68 19 246 | Material Specification | A536 |
| Grades | 65-45-12 | Metal Foundry Manufacturer (Mill) | Dotson iron casting |
| Prestressing Manufacturer | Dywidag Systems |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2016-05-31-12
DIME Test ID: 2016-05-31-12-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2016-06-08
Test Results
Number of Samples: 4
Input Type: Calculated
Tester's full name: Arnold
Date of test: 06/07/2016
UTM: 67KIP
Temperature: 71 F
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1466 | 0.498 | 0.1948 | 50671 | 86790 | 14.4 | Arnold | |
| 2 | 1466 | 0.498 | 0.1948 | 48976 | 80960 | 15.4 | Arnold | |
| 3 | 1476 | 0.4975 | 0.1944 | 48185 | 79550 | 13.8 | Arnold | |
| 4 | 1476 | 0.498 | 0.1948 | 47235 | 78780 | 14.5 | Arnold |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 6/8/2016 ✔