DIME - Test Summary

Summary for Test 2022-04-27-7-4

Test performed: CTM 214-August 2010

Project Identifiers	Project ID: 99999 DEA: 0322222
DIST-CO-RTE-PM	03-SAC,OMG-888,99,80-0.6-0.6
Award Date	Not set
Closeout Date	Not set
Work Description	THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description	THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
QA Service Level	(Verified on 04/05/2013)

Sample Taken Date	04/27/2022	Sample Unique Key	7
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/27/2022
Sample type	Quality Control	A brief description of the sample	1x4 coarse aggregate
The quantity of what the sample constitutes	Stockpile	From where was the sample collected	Source
First name of sampler or witnessed by	Brett	Last name of sampler or witnessed by	Soldano
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	jomara facility	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	XX-XX-XXXX
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-04-27-7

DIME Test ID: 2022-04-27-7-4

Testing Lab: ZZCT DIME Development Laboratory A - Bellflower - Internal

Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate

Test Release Date: 2022-04-27

What size aggregate is being tested?: Coarse Aggregate

Input Type: Calculated

Tester's full name: Brett Soldano

Date of test: 04/27/2022

Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data

Percentage Loss of material retained on 1 ½ x 1 in. sieve: 0.0 %

Percentage Loss of material retained on 1 x ¾ in. sieve: 0.0 %

Percentage Loss of material retained on ¾ x ½ in. sieve: 0.2 %

Percentage Loss of material retained on ½ x ⅜ in. sieve: 0.1 %

Percentage Loss of material retained on ⅜ in. x #4 sieve: 0.1 %

Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data

Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data

Percentage Loss of material retained on 3/4 in. through #4 sieve: no data

Weighted Average Percent Loss of Coarse Aggregate: 0.1 %

Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data

Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/27/2022 ✔