Summary for Test 2022-03-16-5-2
Test performed: CTM 231-March 2013Project Information
Project Identifiers | Project ID: 215108 DEA: 07337604 EFIS: 0717000036 |
---|---|
DIST-CO-RTE-PM | 07-LA-14-R28.9/R29.2 |
Award Date | 10/15/2020 |
Closeout Date | 05/04/2023 |
Work Description | REPLACE EXISTING STORM DRAIN, AND CONSTRUCT A COLLECTION SYSTEM. |
Location Description | LOS ANGELES COUNTY IN AND NEAR SANTA CLARITA FROM 0.8 MILE NORTH OF PLACERITA CANYON ROAD UNDERCROSSING TO 0.5 MILE SOUTH OF GOLDEN VALLEY ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 02/24/2021) |
Sample Information
Sample Taken Date | 03/16/2022 | Sample Unique Key | 5 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/16/2022 |
Sample type | Acceptance | A brief description of the sample | Aggregate Base |
The quantity of what the sample constitutes | 4875 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Chad | Last name of sampler or witnessed by | Chotibhongs |
Title of sampler | MREA | Telephone number of sampler | 213-817-0387 |
Laboratory sample identification | 22-0492 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | NA | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | NA |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | CTM 231 Test Holes | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-03-16-5
DIME Test ID: 2022-03-16-5-2
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Test Release Date: 2022-03-16
Test Results
Method Type:: Direct Read
Number of Tests:: 3
Common Test Maximum Used:: No
Input Type: Measured
Tester's full name: Chad Chotibhongs
Date of test: 03/16/2022
Gage No.: 60293
Test No.: 1
Nuclear By: Chad Chotibhongs
Non-Bias Plan No.: 8
Depth: 9
Material No.: On-Site
Material Type: Aggregate Base
Impact By: Chad Chotibhongs
Standard Count Density: 2200 g/cc
Count or Density 1: 2.16 g/cc
Count or Density 2: 2.18 g/cc
Count or Density 3: 2.15 g/cc
Standard Count Moisture: 649 g/cc
Moisture Count 1: 0.18 g/cc
Moisture Count 2: 0.19 g/cc
Moisture Count 3: 0.2 g/cc
Sum of Count or Density: 6.49 g/cc
Average of Count or Density: 2.16 g/cc
Sum of Moisture Count: 0.57 g/cc
Average of Moisture Count: 0.19 g/cc
Calculated Percent Relative Compaction: 96.6 %
Reported Percent Relative Compaction: 97 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/16/2022 ✔