Summary for Test 2022-01-04-24-2
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 213411 DEA: 030H10U4 EFIS: 0317000246 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-5-9.7/24.9 |
| Award Date | 05/01/2019 |
| Closeout Date | 02/22/2024 |
| Work Description | Not set |
| Location Description | Construction on state highway in Sacramento County in and near Sacramento from 1.1 miles south of Elk Grove Boulevard to American River Viaduct |
| QA Service Level | 1 (Verified on 07/19/2019) |
Sample Information
| Sample Taken Date | 01/04/2022 | Sample Unique Key | 24 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/04/2022 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can |
| The quantity of what the sample constitutes | 32 Totes | From where was the sample collected | Source |
| First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Tikusis |
| Title of sampler | Technical Director | Telephone number of sampler | 17073309227 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Kwik Bond Polymers and Polynt | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1377391 |
|---|---|---|---|
| Batch number | 1377391 | Mix number | 1377391 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-01-04-24
DIME Test ID: 2022-01-04-24-2
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2022-01-25
Test Results
Number of specimens tested: 5
Input Type: Measured
Tester's full name: Daniel Tikusis
Date of test: 01/17/2022
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.5 in
Sample 1 Thickness: 0.129 in
Sample 1 Area: 0.0645 in^2
Sample 1 Ultimate Strength Actual: 292.1 lbs
Sample 1 percent elongation: 29.8 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.5 in
Sample 2 Thickness: 0.127 in
Sample 2 Area: 0.0635 in^2
Sample 2 Ultimate Strength Actual: 251.2 lbs
Sample 2 percent elongation: 49 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.5 in
Sample 3 Thickness: 0.127 in
Sample 3 Area: 0.0635 in^2
Sample 3 Ultimate Strength Actual: 249.3 lbs
Sample 3 percent elongation: 49.9 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.5 in
Sample 4 Thickness: 0.126 in
Sample 4 Area: 0.063 in^2
Sample 4 Ultimate Strength Actual: 241.3 lbs
Sample 4 percent elongation: 46 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.5 in
Sample 5 Thickness: 0.124 in
Sample 5 Area: 0.062 in^2
Sample 5 Ultimate Strength Actual: 231.2 lbs
Sample 5 percent elongation: 43.3 %
Sample 5 Time: 0 MM:SS
Sample 1 Ultimate strength: 4528.7 psi
Sample 2 Ultimate strength : 3955.9 psi
Sample 3 Ultimate strength: 3926 psi
Sample 4 Ultimate strength: 3830.2 psi
Sample 5 Ultimate strength: 3729 psi
Ultimate Strength Average: 3994 psi
Percent Elongation Average: 44 %
General comments (publicly viewable) (Max 1000 characters): Accepted vendor's results.
Test was verified on 1/25/2022 ✔