DIME - Test Summary

Summary for Test 2021-12-13-10-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 211260 DEA: 072159U4 EFIS: 0715000160
DIST-CO-RTE-PM	07-LA,ORA-5-0.0/1.5, 44.3/44.4
Award Date	05/27/2016
Closeout Date	08/01/2023
Work Description	CONSTRUCT HOV LANES AND MIX FLOW LANES.
Location Description	LOS ANGELES AND ORANGE COUNTIES IN BUENA PARK, LA MIRADA, CERRITOS AND SANTA FE SPRINGS FROM ARTESIA BOULEVARD UNDERCROSSING TO NORTH FORK COYOTE CREEK
QA Service Level	1 (Verified on 03/16/2016)

Sample Taken Date	12/13/2021	Sample Unique Key	10
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	12/16/2021
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA-A-SP R21 0.50% LAS
The quantity of what the sample constitutes	4 Bags Of Agg., 2 Bags of Rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Victor	Last name of sampler or witnessed by	Pham
Title of sampler		Telephone number of sampler
Laboratory sample identification	0662A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials-Irwindale	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035::FISH CANYON QUARRY
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number	220817A IRW SJR	A detailed description of where the material sample was collected	Belt Cut at Vulcan Materials-Irwindale
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-12-13-10

DIME Test ID: 2021-12-13-10-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-12-29

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 12/18/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 965.7 grams

Mass of the pycnometer with water (B): 653.3 grams

Mass of the oven dried sample (before pycnometer) (A): 490.7 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 490.7 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.616

Bulk specific gravity (SSD Basis): 2.665

Apparent specific gravity: 2.752

Absorption: 1.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 12/29/2021 ✔