Summary for Test 2021-11-29-11-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 215697 DEA: 07318204 EFIS: 0715000286 |
---|---|
DIST-CO-RTE-PM | 07-LA-Route 1-4.0/4.2 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | CM/GC Project - Work consists of constructing secant wall and slope restoration |
Location Description | near Point Mugu State Park 0.4 mile South of Sycamore Canyon Road. |
QA Service Level | 1 (Verified on 08/26/2021) |
Sample Information
Sample Taken Date | 11/29/2021 | Sample Unique Key | 11 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/01/2021 |
Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP R15, 0.5 % LAS |
The quantity of what the sample constitutes | 10 Bags of Aggregate, 2 Bags of RAP | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Thomas | Last name of sampler or witnessed by | Shivers |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0655A-21 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Sun Valley | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035::FISH CANYON QUARRY |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R15 | The fabricator/manufacturer designation for the sample | |
The plant number | 220831 SVA LTR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Sun Valley Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-11-29-11
DIME Test ID: 2021-11-29-11-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2021-12-13
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Satish Jain/Sebastian Ferrer
Date of test: 12/03/2021
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 83 %
Cumulative percent passing the 3/8 in. sieve: 66 %
Cumulative percent passing the #4 sieve: 42 %
Cumulative percent passing the #8 sieve: 28 %
Cumulative percent passing the #16 sieve: 19 %
Cumulative percent passing the #30 sieve: 14 %
Cumulative percent passing the #50 sieve: 9 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 3.7 %
General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate Gradation
Test was verified on 12/13/2021 ✔