Summary for Test 2021-11-22-28-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 213598 DEA: 051F75U4 EFIS: 0518000092 |
---|---|
DIST-CO-RTE-PM | 05-MON-101-R36.9/47.7 |
Award Date | 01/16/2019 |
Closeout Date | 01/11/2024 |
Work Description | CRCP, SEISMIC RETROFIT, BRIDGE WIDENING AND MEDIAN BARRIER |
Location Description | MONTEREY COUNTY IN AND NEAR KING CITY FROM 0.4 MILE SOUTH OF WILD HORSE ROAD OVERCROSSING TO TEAGUE AVENUE |
QA Service Level | 1 (Verified on 10/11/2018) |
Sample Information
Sample Taken Date | 11/22/2021 | Sample Unique Key | 28 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/22/2021 |
Sample type | Quality Assurance | A brief description of the sample | Class 1 Base |
The quantity of what the sample constitutes | 500cy | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Randal | Last name of sampler or witnessed by | Burgess, Sr |
Title of sampler | TET | Telephone number of sampler | 805-748-5077 |
Laboratory sample identification | 211122 | Linked DIME Sample ID | 213598 |
The fabricator/manufacturer/facility name | OHL | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | 27-Mont | |
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Stockpile |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Class 1 Base | The fabricator/manufacturer designation for the sample | |
The plant number | A detailed description of where the material sample was collected | FL Sta 552.50 | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-11-22-28
DIME Test ID: 2021-11-22-28-1
Testing Lab: CT D05 - Big Sur Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-12-02
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Randal Burgess, Sr
Date of test: 11/22/2021
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 99 %
Cumulative percent passing the 1 in. sieve: 96 %
Cumulative percent passing the 3/4 in. sieve: 94 %
Cumulative percent passing the 1/2 in. sieve: 80 %
Cumulative percent passing the 3/8 in. sieve: 70 %
Cumulative percent passing the #4 sieve: 48 %
Cumulative percent passing the #8 sieve: 75 %
Cumulative percent passing the #16 sieve: 56 %
Cumulative percent passing the #30 sieve: 37 %
Cumulative percent passing the #50 sieve: 21 %
Cumulative percent passing the #100 sieve: 11 %
Cumulative percent passing the #200 sieve: 7 %
General comments (publicly viewable) (Max 1000 characters): Pass
Test was verified on 12/2/2021 ✔