Summary for Test 2021-09-28-25-8
Test performed: AASHTO T313-19Project Information
| Project Identifiers | Project ID: 214920 DEA: 073W8704 EFIS: 0717000118 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-1-46.9/50.4 |
| Award Date | 06/09/2020 |
| Closeout Date | 07/03/2023 |
| Work Description | PERFORM SLURRY SEAL, REPLACE AC SURFACING AND INDIVIDUAL SLABS. |
| Location Description | LOS ANGELES COUNTY IN AND NEAR MALIBU FROM MALIBU LAGOON BRIDGE TO SOLISTICE CANYON CREEK BRIDGE |
| QA Service Level | 1 (Verified on 04/07/2021) |
Sample Information
| Sample Taken Date | 09/28/2021 | Sample Unique Key | 25 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/01/2021 |
| Sample type | Per Request | A brief description of the sample | PG Asphalt Binder |
| The quantity of what the sample constitutes | 1 Quart Can | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Robert | Last name of sampler or witnessed by | RJ Noble QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0566-21 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | World Oil | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | Lunday Thagard Company-World Oil - South Gate CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-09-28-25
DIME Test ID: 2021-09-28-25-8
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2021-11-05
Test Results
Input Type: Calculated
Tester's full name: Majid Essa
Date of test: 11/05/2021
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 103.000 mPa
Estimated Stiffness Modulus 60.0 s: no data
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.349
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/5/2021 ✔