Summary for Test 2021-10-27-10-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 215704 DEA: 020J9104 EFIS: 0219000174 |
---|---|
DIST-CO-RTE-PM | 02-LAS,MOD,SHA-89,139,299-VAR |
Award Date | 06/03/2021 |
Closeout Date | 08/08/2022 |
Work Description | REPAIR UNSOUND CONCRETE, POLYESTER CONCRETE OVERLAYS, JOINT SEALS. |
Location Description | LASSEN, MODOC, AND SHASTA COUNTIES AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 05/03/2021) |
Sample Information
Sample Taken Date | 10/27/2021 | Sample Unique Key | 10 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/27/2021 |
Sample type | Acceptance | A brief description of the sample | 3/4" Lime treated coldfeed |
The quantity of what the sample constitutes | PSE 2 Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | D78967 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | J F Shea Construction Inc - Fawndale Rock and Asphalt - Redding CA | Transportation Laboratory (TL) Number | 875743 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0017 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant Sampler | |
Where the material sample would have been placed if not sampled | 02 MOD LAS SIS SHA VAR | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | Unknown | |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-10-27-10
DIME Test ID: 2021-10-27-10-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2021-11-18
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Darrell Valasek
Date of test: 10/28/2021
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
6607 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
9.0 grams | 99.9 % | |||||
1136.0 grams | 82.8 % | |||||
2060.0 grams | 68.8 % | |||||
3018 grams | 54.3 % | |||||
3435.0 grams | 48 % | |||||
199.9 grams | 29.4 % | |||||
320.3 grams | 18.2 % | |||||
387.0 grams | 12 % | |||||
421.9 grams | 8.7 % | |||||
444.6 grams | 6.6 % | |||||
458.1 grams | 5.37 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/18/2021 ✔