Summary for Test 2021-10-14-20-1
Test performed: ASTM C39-17aProject Information
| Project Identifiers | Project ID: 214562 DEA: 040J7104 EFIS: 0414000029 |
|---|---|
| DIST-CO-RTE-PM | 04-SOL-80-1.8/4.4 |
| Award Date | 03/17/2020 |
| Closeout Date | 02/29/2024 |
| Work Description | RAISE BRIDGE AND PLACE STRUCTURAL CONCRETE. |
| Location Description | SOLANO COUNTY IN VALLEJO AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 12/03/2019) |
Sample Information
| Sample Taken Date | 10/14/2021 | Sample Unique Key | 20 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/19/2021 |
| Sample type | Quality Assurance | A brief description of the sample | Abutment Backwall |
| The quantity of what the sample constitutes | 3 Cylinders | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Brandon | Last name of sampler or witnessed by | Biando |
| Title of sampler | TE Civil | Telephone number of sampler | 510-867-6121 |
| Laboratory sample identification | 7 | Linked DIME Sample ID | NA |
| The fabricator/manufacturer/facility name | Syar Lake Herman | Transportation Laboratory (TL) Number | TL-502 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | NA | Structure unique identifier | 23-0088 |
| Structure name | Benicia Road OC |
Material Information
| Material Type | Concrete | The concrete mix design number | CT063AC5 |
|---|---|---|---|
| The truck number from where the sample was collected | 8089 | The batch plant ticket number from where the sample was collected | 88078873 |
| Concrete batch plant | Syar Napa Quarry | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | wheelbarrow | Where the material sample would have been placed if not sampled | Jobsite Wingwall |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-10-14-20
DIME Test ID: 2021-10-14-20-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2021-10-21
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Measured
Tester's full name: SA
Date of test: 10/21/2021
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 4.04 in
Average diameter of cylinder 2: 4.03 in
Average diameter of cylinder 3: 4.03 in
Maximum load on cylinder 1: 41107 lbf
Maximum load on cylinder 2: 49408 lbf
Maximum load on cylinder 3: 49148 lbf
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Type of fracture pattern of cylinder 3: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Correction factor for cylinder 3: 1
Age of specimen: 7 days
Age of specimen in hours: no data
Cross sectional area of cylinder 1: 12.82 in^2
Cross sectional area of cylinder 2: 12.76 in^2
Cross sectional area of cylinder 3: 12.76 in^2
Compressive strength of cylinder 1: 3207.0 psi
Compressive strength of cylinder 2: 3873.0 psi
Compressive strength of cylinder 3: 3853 psi
Compressive strength (to nearest 10 psi): 3640 psi
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for Cylinder Code 1 of 3
Source: Bluehill Data Point File
Test graph for Cylinder Code 2 of 3
Source: Bluehill Data Point File
Test graph for Cylinder Code 3 of 3
Test was verified on 10/21/2021 ✔