Summary for Test 2021-10-07-33-1

Test performed: CTM 212-May 2010

Project Information

Project IdentifiersProject ID: 215403
DEA: 021H4004
EFIS: 0216000042
DIST-CO-RTE-PM02-SIS-5-R8.3
Award Date03/02/2021
Closeout Date02/28/2022
Work DescriptionPLACE STRUCTURAL CONCRETE BRIDGE DECK AND BARRIER AND PLACE HMA.
Location DescriptionSISKIYOU COUNTY NEAR MOUNT SHASTA AT AZALEA ROAD OVERCROSSING
QA Service Level1 (Verified on 01/07/2021)

Sample Information

Sample Taken Date10/07/2021 Sample Unique Key33
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/09/2021
Sample typeAcceptance A brief description of the sampleClass 2 Aggregate Base
The quantity of what the sample constitutes2 bags for unit weight From where was the sample collectedManufacturer
First name of sampler or witnessed byKarl Last name of sampler or witnessed byHuntman
Title of samplerJET Telephone number of sampler
Laboratory sample identificationD78955 Linked DIME Sample ID
The fabricator/manufacturer/facility nameMountain Gate Quarry Transportation Laboratory (TL) Number853081
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0001
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedStockpile
Where the material sample would have been placed if not sampled02 SIS 5 Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2021-10-07-33
DIME Test ID: 2021-10-07-33-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2021-10-21

Test Results


Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 10/11/2021
Weight of water in the measure: 21.05 lbm
Water temperature: 72 deg F
Tare weight of empty measure: 12.973 lbm
Weight of measure filled with aggregate (test 1): 38.596 lbm
Weight of measure filled with aggregate (test 2): 38.689 lbm
Weight of measure filled with aggregate (test 3): 38.665 lbm
Water density: 62.28 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 25.62 lbm
Net weight of aggregate in measure (test 2): 25.72 lbm
Net weight of aggregate in measure (test 3): 25.69 lbm
Average net weight of aggregate required to fill the measure: 25.68 lbm
Aggregate unit weight: 75.98 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/21/2021