Summary for Test 2015-10-15-12-1
Test performed: ASTM C39-17aProject Information
| Project Identifiers | Project ID: 209950 DEA: 080N56U4 EFIS: 0813000176 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-40-R94.7/R99.7 |
| Award Date | 01/22/2015 |
| Closeout Date | 09/17/2018 |
| Work Description | BRIDGE REPLACEMENTS. |
| Location Description | SAN BERNARDINO COUNTY NEAR ESSEX AT HALLER WASH BRIDGE AT ROJO WASH BRIDGE AND AT CLIPPER VALLEY WASH BRIDGE |
| QA Service Level | 1 (Verified on 04/29/2015) |
Sample Information
| Sample Taken Date | 10/15/2015 | Sample Unique Key | 12 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/22/2015 |
| Sample type | Quality Control | A brief description of the sample | 6X12 |
| The quantity of what the sample constitutes | 2 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | JEGBEFUME | Last name of sampler or witnessed by | ADODO |
| Title of sampler | ASR | Telephone number of sampler | Unknown |
| Laboratory sample identification | 907-07 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | ROBERTSONS | Transportation Laboratory (TL) Number | 007 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | ROJO WASH BRIDGE R |
| Structure name | ABUT 1 AND WING WALLS |
Material Information
| Material Type | Concrete | The concrete mix design number | RRM15025 |
|---|---|---|---|
| The truck number from where the sample was collected | 1195 | The batch plant ticket number from where the sample was collected | 1308873 |
| Concrete batch plant | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| A detailed description of where the material sample was collected | LOAD 5 | Where the material sample would have been placed if not sampled | Unknown |
| From Lot No. | Not set | Bag Lot No. | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2015-10-15-12
DIME Test ID: 2015-10-15-12-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2015-11-12
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: Matthew Clayton
Date of test: 11/12/2015
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 5.97 in
Average diameter of cylinder 2: 5.97 in
Maximum load on cylinder 1: 121220 lb
Maximum load on cylinder 2: 119040 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 0.00
Age of specimen: 28 days
Age of specimen in hours: no data
Cross sectional area of cylinder 1: 27.99 in^2
Cross sectional area of cylinder 2: 27.99 in^2
Compressive strength of cylinder 1: 4,330.8 psi
Compressive strength of cylinder 2: 4,252.9 psi
Compressive strength (to nearest 10 psi): 4290 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/12/2015 ✔