Summary for Test 2021-08-12-44-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 08/12/2021 | Sample Unique Key | 44 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/02/2021 |
Sample type | Verification | A brief description of the sample | 1/2" HMA PG 58-22 25% RAP |
The quantity of what the sample constitutes | 3 Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Harish | Last name of sampler or witnessed by | Thakur |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Cal Trans Lab | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Granite Pleasanton | Transportation Laboratory (TL) Number | 21-JMFPP-0164 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0009 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-08-12-44
DIME Test ID: 2021-08-12-44-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2021-09-10
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Ryan Kester/ Bang Nguyen
Date of test: 09/09/2021
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2144.7 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
150.8 grams | 93 % | |||||
459.3 grams | 78.6 % | |||||
879.3 grams | 59 % | |||||
529.4 grams | 25.9 % | |||||
684.5 grams | 16.3 % | |||||
766.8 grams | 11.1 % | |||||
829.2 grams | 7.2 % | |||||
874.8 grams | 4.4 % | |||||
897.8 grams | 2.94 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/10/2021 ✔