Summary for Test 2021-06-30-35-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 215572 DEA: 032G1104 EFIS: 0320000230 |
---|---|
DIST-CO-RTE-PM | 03-GLE-162-66.6/76.3 |
Award Date | 05/06/2021 |
Closeout Date | 06/27/2022 |
Work Description | PLACE RHMA AND COLD IN-PLACE RECYCLE. |
Location Description | GLENN COUNTY IN AND NEAR WILLOWS FROM 0.2 MILE EAST OF N SHASTA STREET TO 1.0 MILE EAST OF ROAD X |
QA Service Level | 1 (Verified on 03/22/2021) |
Sample Information
Sample Taken Date | 06/30/2021 | Sample Unique Key | 35 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/26/2021 |
Sample type | Verification | A brief description of the sample | 1/2" untreated Virgin Aggregate |
The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Brad | Last name of sampler or witnessed by | McKeehan |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Knife River Construction - Orland Drum Plant | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA or name of Pit) | 91-11-0007 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | belt feed | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | JMF Verification ID | JMF3513-2021-66 |
Test Details
DIME Sample ID: 2021-06-30-35
DIME Test ID: 2021-06-30-35-1
Testing Lab: CT D03 - North Region Materials Lab
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2021-08-06
Test Results
What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Input Type: Measured
Tester's full name: Tom Stinnett
Date of test: 07/27/2021
Total mass of material in the sample: 13241.9 grams
Cumulative mass retained on the 1 1/2 in. sieve: 0 grams
Cumulative mass retained on the 1 in. sieve: 0 grams
Cumulative mass retained on the 3/4 in. sieve: 0 grams
Cumulative mass retained on the 1/2 in. sieve: 841.7 grams
Cumulative mass retained on the 3/8 in. sieve: 2393.2 grams
Cumulative mass retained on the #4 sieve: 8243.9 grams
Total sample mass passing the #4 sieve: 0 grams
Total mass of fine material in the sample: 501.3 grams
Cumulative mass retained on the #8 sieve: 194.2 grams
Cumulative mass retained on the #16 sieve: 298.5 grams
Cumulative mass retained on the #30 sieve: 362.3 grams
Cumulative mass retained on the #50 sieve: 408.8 grams
Cumulative mass retained on the #100 sieve: 441.9 grams
Cumulative mass retained on the #200 sieve: 462.2 grams
Cumulative percent passing the 1 1/2 in. sieve:100 %
Cumulative percent passing the 1 in. sieve:100 %
Cumulative percent passing the 3/4 in. sieve:100 %
Cumulative percent passing the 1/2 in. sieve:93.6 %
Cumulative percent passing the 3/8 in. sieve:81.9 %
Cumulative percent passing the #4 sieve:37.7 %
Cumulative percent passing the #8 sieve:23.1 %
Cumulative percent passing the #16 sieve:15.3 %
Cumulative percent passing the #30 sieve:10.5 %
Cumulative percent passing the #50 sieve:7 %
Cumulative percent passing the #100 sieve:4.5 %
Cumulative percent passing the #200 sieve:2.94 %
General comments (publicly viewable) (Max 1000 characters): JMF 21-035
Test was verified on 8/6/2021 ✔