Summary for Test 2021-07-21-25-2

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 215579
DEA: 061A9504
EFIS: 0620000144
DIST-CO-RTE-PM06-KER-46;65,65-51.2/57.8;0.8/6.9
Award Date04/27/2021
Closeout Date03/02/2022
Work DescriptionCOLD PLANE PAVEMENT AND PLACE RHMA (GAP GRADED).
Location DescriptionKERN COUNTY ON ROUTE 46 FROM NORTH JUNCTION ROUTE 43 TO ROUTE 46/99 SEPARATION AND ON ROUTE 65 FROM 0.1 MILE NORTH OF 7TH STANDARD ROAD TO 0.1 MILE NORTH OF MERCED AVENUE.
QA Service Level1 (Verified on 03/22/2021)

Sample Information

Sample Taken Date07/21/2021 Sample Unique Key25
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/26/2021
Sample typeDepartment Acceptance A brief description of the samplebinder
The quantity of what the sample constitutes2 cans From where was the sample collectedSource
First name of sampler or witnessed bygranite Last name of sampler or witnessed bygranite
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameSan Joaquin Refinery Transportation Laboratory (TL) Number751550
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
Modified Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierSan Joaquin Refinery - Bakersfield CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-07-21-25
DIME Test ID: 2021-07-21-25-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-08-04

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Ruben Macias
Date of test: 08/01/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.178 kPa
Phase Angle (δ) (for the 10 cycles): 89.3 degree
Complex Modulus (G*) (for the 10 measurements): 1.485 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.49 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications OG

Test was verified on 8/4/2021