Summary for Test 2021-07-12-39-2

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 214926
DEA: 010E7204
EFIS: 0115000003
DIST-CO-RTE-PM01-LAK-29-12.7/14.5
Award Date07/07/2020
Closeout Date07/21/2022
Work DescriptionROADWAY EXCAVATION, HMA (TYPE A), RHMA-G, DRAINAGE & EROSION CONTROL.
Location DescriptionLAKE COUNTY NEAR LOWER LAKE FROM 0.8 MILE NORTH OF SPRUCE GROVE ROAD SOUTH TO 0.4 MILE SOUTH OF HOFACKER LANE
QA Service Level1 (Verified on 06/10/2020)

Sample Information

Sample Taken Date07/12/2021 Sample Unique Key39
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/21/2021
Sample typeDepartment Acceptance A brief description of the samplePG64-16
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedManufacturer
First name of sampler or witnessed by_ Last name of sampler or witnessed by_
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameBodean - Santa Rosa Transportation Laboratory (TL) Numberc724975
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA SupplierBoDean - Santa Rosa
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-07-12-39
DIME Test ID: 2021-07-12-39-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-07-28

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 07/26/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.446 kPa
Phase Angle (δ) (for the 10 cycles): 80.1 degree
Complex Modulus (G*) (for the 10 measurements): 4.457 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 4.52 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications RTFO DSR

Test was verified on 7/28/2021