Summary for Test 2021-05-14-34-2
Test performed: AASHTO T30-19Project Information
Project Identifiers | Project ID: 212496 DEA: 024E4504 EFIS: 0200020286 |
---|---|
DIST-CO-RTE-PM | 02-LAS,MOD-139,299-VAR |
Award Date | 07/28/2020 |
Closeout Date | 08/14/2023 |
Work Description | PLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS. |
Location Description | LASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87 |
QA Service Level | 1 (Verified on 06/06/2017) |
Sample Information
Sample Taken Date | 05/14/2021 | Sample Unique Key | 34 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/18/2021 |
Sample type | Department Acceptance | A brief description of the sample | Fine RAP |
The quantity of what the sample constitutes | 750 Tons | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Emilio | Last name of sampler or witnessed by | Chavez |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78798B | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Shaw Pit Facility - Lookout, CA | Transportation Laboratory (TL) Number | 765850 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Reclaimed Asphalt Pavement | RAP Source | Hat Creek Construction and Materials, Shaw Pit Facility, Lookout, CA |
---|---|---|---|
Aggregate Size | 3/8-inch | Aggregate Source | |
RAP Stockpile | Stockpile Size (tons) | ||
Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
DIME Sample ID: 2021-05-14-34
DIME Test ID: 2021-05-14-34-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2021-07-22
Test Results
Does this test use 1/4 sieve?: Yes
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 05/19/2021
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
1554.2 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
5.2 grams | 99.7 % | |||||
168.2 grams | 89.2 % | |||||
305.9 grams | 80.3 % | |||||
642.6 grams | 58.7 % | |||||
880.6 grams | 43.3 % | |||||
1043 grams | 32.9 % | |||||
1170.8 grams | 24.7 % | |||||
1269.9 grams | 18.3 % | |||||
1338.7 grams | 13.9 % |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/22/2021 ✔