Summary for Test 2021-05-11-28-3

Test performed: AASHTO T209-12

Project Information

Project IdentifiersProject ID: 215252
DEA: 021J4704
EFIS: 0220000082
DIST-CO-RTE-PM02-TRI-3-46.7/49.8,63.8/67.704
Award Date12/18/2020
Closeout Date09/30/2021
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING.
Location DescriptionTRINITY COUNTY NEAR TRINITY CENTER FROM 0.7 MILE NORTH OF CEDAR STOCK ROAD TO DIENER MINE VIADUCT AND FROM 2.3 MILES NORTH OF EL DORADO WAY TO COFFEE CREEK BRIDGE NO. 05-0060
QA Service Level1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date05/11/2021 Sample Unique Key28
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/11/2021
Sample typeAcceptance A brief description of the sample3/8-inch RAP (Combined)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of sampler Telephone number of sampler
Laboratory sample identificationD78794B Linked DIME Sample ID
The fabricator/manufacturer/facility nameJ F Shea Construction - Fawndale Rock and Asphalt - Redding, CA Transportation Laboratory (TL) Number768792
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeReclaimed Asphalt Pavement RAP SourceFawndale Rock and Asphalt, Redding, CA
Aggregate Size3/8-inch Aggregate Source
RAP Stockpile Stockpile Size (tons)
Reclaimed Asphalt Pavement Mix NumberNot set

Test Details

DIME Sample ID: 2021-05-11-28
DIME Test ID: 2021-05-11-28-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2021-07-09

Test Results


Number of tests: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 05/13/2021
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7336.6 grams
Mass of oven-dry sample in air for Sample 1: 1565.2 grams
Mass of container filled with the sample and water for Sample 1: 8279.2 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.514
Theoretical maximum density at 25°C (77°F): no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/9/2021