Summary for Test 2021-06-17-36-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 212777 DEA: 021H1104 EFIS: 0215000106 |
---|---|
DIST-CO-RTE-PM | 02-LAS-299-25.58/25.58 |
Award Date | 12/04/2019 |
Closeout Date | 08/14/2023 |
Work Description | BUILDING WORK. |
Location Description | LASSEN COUNTY ABOUT 11 MILES EAST OF BIEBER AT THE ADIN MAINTENANCE STATION |
QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
Sample Taken Date | 06/17/2021 | Sample Unique Key | 36 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/21/2021 |
Sample type | Acceptance | A brief description of the sample | 1 bag of Lime Treated Dust Sized Aggregate from Hot Bin |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Emilio | Last name of sampler or witnessed by | Chavez |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78847C | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Eagle Peak Rock and Paving – Alturas Plant (Alturas, CA) | Transportation Laboratory (TL) Number | 766443 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name | Not Applicable |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-25-0029::Hogsback |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Hot Bin |
Where the material sample would have been placed if not sampled | 02 LAS 299 PM 25 6 | Primary Aggregate Nominal Size | fine |
The concrete mix design number | Not Applicable | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-06-17-36
DIME Test ID: 2021-06-17-36-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-01-13
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/21/2021
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
518.4 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0 grams | 100 % | |||||
10.8 grams | 97.9 % | |||||
187.3 grams | 61.9 % | |||||
336.1 grams | 33.1 % | |||||
409.3 grams | 19 % | |||||
444.7 grams | 12.2 % | |||||
463.3 grams | 8.6 % | |||||
472.7 grams | 6.74 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/13/2022 ✔