Summary for Test 2021-03-25-9-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 215254 DEA: 031G5104 EFIS: 0318000313 |
|---|---|
| DIST-CO-RTE-PM | 03-BUT,COL,GLE,SUT,YOL-5,32,70,80,162-VAR |
| Award Date | 12/16/2020 |
| Closeout Date | 09/27/2021 |
| Work Description | REMOVE & PLACE POLYESTER CONC OVERLAY, PLACE JOINT SEAL & HMA. |
| Location Description | BUTTE, COLUSA, GLENN, SUTTER, AND YOLO COUNTIES AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 11/11/2020) |
Sample Information
| Sample Taken Date | 03/25/2021 | Sample Unique Key | 9 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/25/2021 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can |
| The quantity of what the sample constitutes | 8 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Tikusis |
| Title of sampler | Technical Director | Telephone number of sampler | 707-330-9227 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Kwik Bond Polymers and Polynt | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1322429 |
|---|---|---|---|
| Batch number | 1322429 | Mix number | 1322429 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-03-25-9
DIME Test ID: 2021-03-25-9-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2021-05-19
Test Results
Number of specimens tested: 5
Input Type: Measured
Tester's full name: Phillip Montes
Date of test: 04/06/2021
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.491 in
Sample 1 Thickness: 0.227 in
Sample 1 Area: 0.1115 in^2
Sample 1 Ultimate Strength Actual: 338 lbs
Sample 1 percent elongation: 50.6 %
Sample 1 Time: 3 MM:SS
Sample 2 Width: 0.49 in
Sample 2 Thickness: 0.228 in
Sample 2 Area: 0.1117 in^2
Sample 2 Ultimate Strength Actual: 354.4 lbs
Sample 2 percent elongation: 41.8 %
Sample 2 Time: 3 MM:SS
Sample 3 Width: 0.491 in
Sample 3 Thickness: 0.232 in
Sample 3 Area: 0.1139 in^2
Sample 3 Ultimate Strength Actual: 354.1 lbs
Sample 3 percent elongation: 54.3 %
Sample 3 Time: 3 MM:SS
Sample 4 Width: 0.49 in
Sample 4 Thickness: 0.235 in
Sample 4 Area: 0.1152 in^2
Sample 4 Ultimate Strength Actual: 364.2 lbs
Sample 4 percent elongation: 54.7 %
Sample 4 Time: 3 MM:SS
Sample 5 Width: 0.491 in
Sample 5 Thickness: 0.234 in
Sample 5 Area: 0.1149 in^2
Sample 5 Ultimate Strength Actual: 377 lbs
Sample 5 percent elongation: 68.4 %
Sample 5 Time: 3 MM:SS
Sample 1 Ultimate strength: 3031.4 psi
Sample 2 Ultimate strength : 3172.8 psi
Sample 3 Ultimate strength: 3108.9 psi
Sample 4 Ultimate strength: 3161.5 psi
Sample 5 Ultimate strength: 3281.1 psi
Ultimate Strength Average: 3151 psi
Percent Elongation Average: 54 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/19/2021 ✔