Summary for Test 2021-03-23-26-1
Test performed: AASHTO T240-17Project Information
| Project Identifiers | Project ID: 215251 DEA: 021J4604 EFIS: 0220000081 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-96-34.5/38.8,88.0/92.0 |
| Award Date | 02/02/2021 |
| Closeout Date | 09/27/2021 |
| Work Description | HMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE. |
| Location Description | SISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE |
| QA Service Level | 1 (Verified on 10/30/2020) |
Sample Information
| Sample Taken Date | 03/23/2021 | Sample Unique Key | 26 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/07/2021 |
| Sample type | Acceptance | A brief description of the sample | PG58-22 |
| The quantity of what the sample constitutes | 2 of 2 cans | From where was the sample collected | Source |
| First name of sampler or witnessed by | D | Last name of sampler or witnessed by | Ownes |
| Title of sampler | PEI | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Valero - Benicia, CA | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | c897291 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Tullis Inc | |
| Asphalt Binder Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-03-23-26
DIME Test ID: 2021-03-23-26-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Test Release Date: 2021-05-21
Test Results
Is mass change based on one or two containers?: Two
Input Type: Measured
Tester's full name: Harish Thakur
Date of test: 05/10/2021
Any material loss from containers during heating process/testing?: No
Mass of empty container #1: 172.120 grams
Mass of empty container #2: 175.453 grams
Mass of container #1 before test (m1i): 207.758 grams
Mass of container #2 before test (m2i): 210.722 grams
Mass of container #1 after test (m1f): 207.576 grams
Mass of container #2 after test (m2f): 210.542 grams
Average mass change: -0.511 percent
General comments (publicly viewable) (Max 1000 characters): as per 2018 standard specs
Test was verified on 5/21/2021 ✔