Summary for Test 2021-01-25-1-9
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 01/25/2021 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/26/2021 |
Sample type | Verification | A brief description of the sample | Batch Plant - 4 bins - 2 bags each (3/4, 1/2, 3/8, and 1/4) plus 1 bag mineral filler |
The quantity of what the sample constitutes | 9 bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Ignocencio | Last name of sampler or witnessed by | Herrera |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 21-JFMPP-0007 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Syar Industries | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-48-0002::LAKE HERMAN QUARRY |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Hot Bins | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-01-25-1
DIME Test ID: 2021-01-25-1-9
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-02-04
Test Results
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 02/02/2021
Mass of saturated surface dry sample (before pycnometer) (S): 501.5 grams
Mass of the pycnometer with water and aggregate (C): 976.4 grams
Mass of the pycnometer with water (B): 667.4 grams
Mass of the oven dried sample (before pycnometer) (A): 478.5 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 501.5 grams
Mass of the oven dry aggregate (for absorption) (A): 501.5 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.486
Bulk specific gravity (SSD Basis): 2.605
Apparent specific gravity: 2.823
Absorption: 4.8 %
General comments (publicly viewable) (Max 1000 characters): Bulk specific gravity (SSD) of fine aggregate, Bulk specific gravity of fine aggregate, Apparent specific gravity of fine aggregate, Apparent specific gravity of supplemental fines, Absorption of fine aggregate
Test was verified on 2/4/2021 ✔