Summary for Test 2020-12-11-4-3
Test performed: ASTM E415-17
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Project Information
| Project Identifiers | Project ID: 214579 DEA: 010B0904 EFIS: 0100020444 |
|---|---|
| DIST-CO-RTE-PM | 01-DN-101-8.2/8.7 |
| Award Date | 04/21/2020 |
| Closeout Date | Not set |
| Work Description | Panther Creek & Hunter Creek Bridges |
| Location Description | DEL NORTE COUNTY NEAR KLAMATH AT PANTHER CREEK BRIDGE AND AT HUNTER CREEK BRIDGE |
| QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
| Sample Taken Date | 12/11/2020 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 12/14/2020 |
| Sample type | Department Acceptance | A brief description of the sample | 1 1/2" A709 Gr 50 plate |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | kevin | Last name of sampler or witnessed by | muser |
| Title of sampler | qa | Telephone number of sampler | 19165170532 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Thompson Metal Fab | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | S19-650-20 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM6 - Steel Check Sample Plate | Heat Number(s) | 2504752 |
|---|---|---|---|
| Material Specification | A709 | Grade | 50 |
| Thickness | 1.5 | Shape | plate |
| Metal Foundry Manufacturer (Mill) | Nucor | Plate Dimension | 96x480 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-12-11-4
DIME Test ID: 2020-12-11-4-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM E415-17: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Test Release Date: 2021-01-27
Test Results
Input Type: Measured
Tester's full name: Joshua Gallaway
Date of test: 01/21/2021
Content, carbon: 0.144 %
Content, Si: 0.346 %
Content, Mn: 1.10 %
Content, P: 0.013 %
Content, S: 0.0020 %
Content, Cr: 0.57 %
Content, Mo: 0.012 %
Content, Al: 0.036 %
Content, Co: 0.014 %
Content, Copper: 0.298 %
Content, Nb: 0.0024 %
Content, Ti: 0.0035 %
Content, V: 0.036 %
Content, Lead: 0.0081 %
Content, Boron: 0.0003 %
Content, Fe: 97.1 %
Content, Ni: 0.239 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/27/2021 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.