Summary for Test 2020-06-04-34-4
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 214571 DEA: 020J1104 EFIS: 0219000062 |
|---|---|
| DIST-CO-RTE-PM | 02-PLU-70-33.1/42.1 |
| Award Date | 02/07/2020 |
| Closeout Date | 04/27/2021 |
| Work Description | PLACE HMA & SHOULDER BACKING, & REMOVE & REPLACE PAVEMENT DELINEATION. |
| Location Description | PLUMAS COUNTY AT AND NEAR KEDDIE FROM INDIAN CREEK BRIDGE TO 0.3 MILE WEST OF SPANISH CREEK BRIDGE NO. 09-0018 |
| QA Service Level | 1 (Verified on 01/22/2020) |
Sample Information
| Sample Taken Date | 06/04/2020 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/05/2020 |
| Sample type | Verification | A brief description of the sample | 3/4-inch Type A HMA (PG 64-16) 15.0 RAP, 1.0 Lime |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | PEI | Last name of sampler or witnessed by | PEI |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D78456 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Sierra Cascade Aggregate and Asphalt Products | Transportation Laboratory (TL) Number | 733197 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-06-04-34
DIME Test ID: 2020-06-04-34-4
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2020-08-20
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Darrell Valasek
Date of test: 06/08/2020
Mass of the dry specimen in air: 4486.0 g
Mass of the dry specimen plus paraffin coating in air: 4552.6 g
Mass of the dry specimen plus paraffin coating in water: 2564.9 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4485.3
Mass 2 of the dry specimen plus paraffin coating in air: 4569.0
Mass 2 of the dry specimen plus paraffin coating in water: 2566.7
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4485.9
Mass 3 of the dry specimen plus paraffin coating in air: 4543.8
Mass 3 of the dry specimen plus paraffin coating in water: 2569.7
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.344
Bulk Specific Gravity 2: 2.349
Bulk Specific Gravity 3: 2.349
Average Bulk Specific Gravity: 2.347
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/20/2020 ✔