Summary for Test 2020-08-07-8-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214802 DEA: 031G7004 EFIS: 0319000135 |
---|---|
DIST-CO-RTE-PM | 03-SUT-99-28.0/30.6 |
Award Date | 05/18/2020 |
Closeout Date | 03/16/2021 |
Work Description | COLD PLANE AC PAVEMENT, RHMA OVERLAY, & INDUCTIVE LOOP DETECTORS. |
Location Description | SUTTER COUNTY IN AND NEAR YUBA CITY FROM 0.1 MILE NORTH OF SMITH ROAD TO ROUTE 20 |
QA Service Level | 1 (Verified on 03/24/2020) |
Sample Information
Sample Taken Date | 08/07/2020 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/10/2020 |
Sample type | Acceptance | A brief description of the sample | 1/2" cold feed RHMA-O |
The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Source |
First name of sampler or witnessed by | John | Last name of sampler or witnessed by | Bamfield |
Title of sampler | TE | Telephone number of sampler | |
Laboratory sample identification | 20-HMA-0159 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Desilva Gates-Marysville | Transportation Laboratory (TL) Number | C557549 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | not provided |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Auto Sampler at sources | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | 1 | |
Sublot number | 5 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-08-07-8
DIME Test ID: 2020-08-07-8-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-08-14
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Bang Nguyen
Date of test: 08/12/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
5511 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
293.0 grams | 94.7 % | |||||
1136.5 grams | 79.4 % | |||||
3929.5 grams | 28.7 % | |||||
255.3 grams | 15.2 % | |||||
358.0 grams | 9.8 % | |||||
413.5 grams | 6.9 % | |||||
450.7 grams | 4.9 % | |||||
472.7 grams | 3.7 % | |||||
487.9 grams | 2.95 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/14/2020 ✔