Test 2020-04-20-21-5 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 214589
DEA: 020J1604
DIST-CO-RTE-PM02-PLU-284-0.0/8.3
Work DescriptionPLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING).
Location DescriptionPLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072
Sample Information
Sample Taken Date4/20/2020 Sample Unique Key21
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing4/21/2020
Sample typeVerification A brief description of the sampleCombined 3/4-inch Type A Untreated Sized Virgin Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byJimmy Last name of sampler or witnessed byMontana
Title of sampler Laboratory sample identificationD78409F
The fabricator/manufacturer/facility nameWard Lake Pit Transportation Laboratory (TL) Number733180
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-18-0008::WARD LAKE PIT
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedLab-Batched from Sized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberJMF 20-03-S1a Lot numberUnknown
Sublot numberUnknown JMF Verification ID JMF3513-2020-138, JMF3513-2020-141, JMF3513-2020-148, JMF3513-2020-192
Test Details
DIME Sample ID: 2020-04-20-21
DIME Test ID: 2020-04-20-21-5
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-06-11
Test Results

Input Type: Measured
Tester's full name: Ward Jenkins
Date of test: 06/11/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500.9 grams
Mass of the pycnometer with water and aggregate (C): 969.1 grams
Mass of the pycnometer with water (B): 662.5 grams
Mass of the oven dried sample (before pycnometer) (A): 482.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500.9 grams
Mass of the oven dry aggregate (for absorption) (A): 482.9 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.485
Bulk specific gravity (SSD Basis):2.578
Apparent specific gravity:2.739
Absorption:3.7 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 06/11/2020