Summary for Test 2018-07-05-9-1
Test performed: CONCLP 3-16Project Information
Project Identifiers | Project ID: 213213 DEA: 030G8004 EFIS: 0316000246 |
---|---|
DIST-CO-RTE-PM | 03-COL,GLE,SAC,SUT,YUB-5,20,65,80,99-VAR |
Award Date | 05/10/2018 |
Closeout Date | 12/04/2019 |
Work Description | REMOVE AC, PLACE METHACRYLATE & REPAIR BRIDGE JOINTS ON 9 BRIDGES |
Location Description | COLUSA, GLENN, SACRAMENTO, SUTTER, AND YUBA COUNTIES AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 09/24/2018) |
Sample Information
Sample Taken Date | 07/05/2018 | Sample Unique Key | 9 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/19/2018 |
Sample type | Quality Assurance | A brief description of the sample | polyester resin |
The quantity of what the sample constitutes | 1 gallon can | From where was the sample collected | Source |
First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Nunes |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | KBP | Transportation Laboratory (TL) Number | c969876 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Polyester | Mfg. Lot Number(s) | 0001129144 |
---|---|---|---|
Batch number | 0001129144 | Mix number | 0001129144 |
Test Details
DIME Sample ID: 2018-07-05-9
DIME Test ID: 2018-07-05-9-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2018-07-27
Test Results
Input Type: Calculated
Tester's full name: Mike Mullins
Date of test: 07/27/2018
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 104
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 65.6
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 3096
Styrene ASTM D 2369 40% to 50 %: 46.3
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 800
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.1
General comments (publicly viewable) (Max 1000 characters): accepted suppliers results
Test was verified on 7/27/2018 ✔