Summary for Test 2017-03-07-8-1
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 03/07/2017 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/15/2017 |
Sample type | Quality Assurance | A brief description of the sample | Joint Seal |
The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | DS Brown | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | N/A | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 0717160 |
---|---|---|---|
Manufacturer(s) | DS Brown | Temperature | 72 |
Humidity | 45 | Comments | Unknown |
Joint Seal Size | 5 |
Test Details
DIME Sample ID: 2017-03-07-8
DIME Test ID: 2017-03-07-8-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-04-11
Test Results
Input Type: Measured
Tester's full name: Fred
Date of test: 03/21/2017
UTM: 11KIP
Temperature: 74 ?F
Humidity: 46 %
Load at W1: 82.6981 lbs
Width at 4 x Load at W1: 2.24054 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.239 in
Measured Minimum Uncompressed Width: 5.072 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.191 in
Height of Contact Face: 5.2335 in
Length: no data
Spec Minimum Uncompressed Width: 5.072 in
Area (5 Times of the Height of Contact Face): 26.168 sqin
Half of the Spec Minimum Uncompressed Width: 2.5955 in
85 Percent of the Spec Minimum Uncompressed Width: 4.3112 in
3 Times of the Area: 78.504 sqin
4 Times of the Load at W1: 330.792 in
W1 (US Units): 4.311 in
W1 (Metric Units): 109.504 millimeters
W2 (US Units): 2.241 in
W2 (Metric Units): 56.91 millimeters
Satisfactory of MR of (US Units): 2.071 in
Satisfactory of MR of (Metric Units): 52.595 millimeters
Optional W1 Measurement 1: 4.3112 in
Optional W1 Measurement 2: 79.0274 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 4/4/2017 ✔